Acoustic Wood Panels
DIY Tutorial

Change up your space through DIY

Required tools

Hand or electric saw, pencil, screwdriver, adhesive, utility knife, tape measure, 35mm screws (about 15 pieces)

utility knife/美工刀 tape measure/捲尺
electric saw/電鋸 adhesive/太棒膠
screws/螺絲 screwdriver/電鑽

DIY Tutorial

Measure with Tape

Measure the height and width of the wall, leaving 0.2~0.4in of clearance from the floor.

Cut Crosswise

Use a hand or electric saw to cut to desired specification.

Cut Lengthwise

For the lengths of the panels, use a utility knife.

Apply Adhesive

Apply the proper adhesive to the back of the wall panel and firmly press onto the wall.

Stabilize with Screws

Drill the screws into the fiber board for added security.

Additional Info

One panel requires roughly 15 screws.

SPECIFICATION

PRODUCT / Acoustic Wood Panels

MATERIAL / Engineered wood, MDF compressed pine board, 100% Polyester

THICKNESS / 0.8 in

SIZE / 102.3 x 12.6 in

WEIGHT / 28.6 lb/box

PACKAGE / 2pcs/box

There may be slight difference in color between different production batches.

MAINTENANCE

CLEANING INSTRUCTIONS /

Use a dry cloth or a lint roller to remove any dust on the surface.

If you need to use a damp cloth, wipe dry immediately to prevent moisture from seeping in.


CAUTION /

This product is not recommended for use in wet or humid areas. If it does get wet, promptly wipe it dry to prevent damage and bulging of the wood.

Avoid exposure to direct sunlight, as prolonged heat can cause the wood to crack.

Please note that product color may vary due to lighting and screen settings.

Additionally, slight color differences may occur between batches.